• PXL_20260128_124242240
  • FenderJAPAN ストラトキャスター 配線直し&セットアップ ブレンダー配線 Rugir Pickups’s
  • 2026/03/15
  • Category:
  • フェンダージャパン製ストラトキャスターの配線直し・セットアップです。

    リアPUをルジール製のオーダーPU、スイッチポット増設でブレンダー配線に組み換えです。

    ブレンダー回路を組むとフロントとリアのミックスサウンドが出せる様になります。
    センター+リアのハーフトーン時にスイッチONにすれば全てのPUが鳴る状態にも可能です。

    音が良い感じに巻き弦が柔らかく、プレーン弦はバリバリしないバランスの良いサウンドです。

    メイプル指板の影響もあると思いますが非常に理想的なリアサウンドに思いました。
    これは自分も欲しいレベルです。

    ありがとうございました♪


    Wiring rework and setup for a Fender Japan Stratocaster.

    The rear pickup was replaced with a custom-made Rujir pickup, and the switch pot was upgraded to enable blender wiring.

    The blender circuit allows for a mix of the front and rear pickup sounds.
    When the center + rear pickup is selected (half-tone position), switching the pickup selector ON enables all pickups to sound simultaneously.

    The tone is nicely balanced: the wound strings sound soft, and the open strings don’t sound harsh.

    I believe the maple fingerboard also contributes, but I found the rear pickup sound to be exceptionally ideal.
    This is a level I would personally want for myself.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




BLOG CATEGORY

ARCHIVE