月別アーカイブ: 2024年4月

    IMG20231219183530
  • PRS Custom24 ブリッジ加工&セットアップ

  • 2024/04/30
  • Category:
  • PRS製Custom24のブリッジ加工・セットアップです。

    お世話になっておりますMana Diagram の爽人さんからのご依頼です。

    ブリッジで弦が切れ易いとの事で持ち込まれました。

    PRSのブリッジはブラス製の様で素材が柔らかいので弦の張力でサドルに食い込み易く、これにより食い込んだ箇所で弦が切れ易い状態になる事が多い様です。
    過去にも同じ様な方が居られますので、弦が切れ易い様であればサドルを削って食い込み箇所を慣らす必要があります。

    IMG20231219180041

    サドル全てを手直しする事で弦が切れる事も無くなりました。

    PRSで弦がブリッジ側で切れ易い方はこうした修理が必要になります。

    ありがとうございました♪


    This is a bridge modification and setup for a Custom24 made by PRS.

    The customer brought this guitar in because the strings break easily at the bridge.

    The PRS bridge seems to be made of brass, which is a soft material that can easily bite into the saddle due to the tension of the strings, and this often causes the strings to break easily at the point where they bite.
    If the strings break easily, it is necessary to shave the saddle to acclimate the bite point.

    By reworking the entire saddle, the strings no longer break.

    If your PRS is prone to string breakage on the bridge side, this kind of repair is necessary.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    IMG20240428164930
  • 安くて音が良いインシュレーター

  • 2024/04/29
  • Category:
  • オーディオにも昔から「オカルト商品」というジャンルがあり、もはや宗教信者レベルの商品があります。

    安い物は数千円、高い物は数百万円にもなる物が存在します。商品としては同じ様な物のはずなのにそこまで大きい理由は何なのでしょうか?

    またこうした商品には具体的な効果への確証が無く、情報は全て個人の主観とステマで賑わっています。
    結局は調べても本当の情報に辿り着く事はできません。

    結果的には自分で試してチェックしないと分からない分野です。

    本当なのかウソなのか分からない分野だからこそ、情報を持たない人は良い金ヅルと化してしまいます。

    「良い様に見せれば超高額な商品でも買ってくれる人が居る。」

    そんなジャンルを見つけたからこそ悪い人達が沢山入ってきて商売する様な場になってしまいました。
    これは騙す方も悪いですが騙される方も悪いです。
    大多数が騙されなければ、そこで下手な商売ができないので淘汰される結果になりますが現実は全くの逆。
    この場で本当の情報を得るには難しくなり、変な商品も多くなり良い物を見つけるにも苦労する環境となっています。
    こうした環境は皆が知識を付けて変えないとどんどん酷い環境になっていきます。

    今日も記事を読んで勉強して下さい。

    ●大理石インシュレーター●

    スクリーンショット (71)

    IMG20240428164930

    正確には人工大理石になるのですが、こちらが意外と音が良いのでお勧めです。

    破片で買えば1枚110円、これをスピーカーに置ける枚数を購入して使ってみて下さい。

    もちろん案件でも何でもありません。

    元々は過去記事にもありますがドラム用のレゾリングを使用していましたが、音が良いインシュレーターとして大理石を知ったので今回使用してみたら音質の良さは結構あるのでそのまま使用し続ける事になりました。

    ●大理石インシュレーターのサウンド●

    大理石ですが音については「バランス型」です。

    特に変な偏りも無いので低域に寄ったり高域に寄る印象もありません。

    音はタイト系になるかもしれませんが、それがキツイ感じもありません。
    音の分離が良くなるので元の状態よりも楽器の音が見え易くなるはずです。

    音の分離も良くなるので、110円で買える素材としてまず間違い無く音は良いです。

    そしてインシュレーターについては安くても大体セットで3000円程度のはずですので、まず間違いなく値段で見たら1番音が良いと言っても良い素材です。

    ですがこうした情報は調べても出てきません。

    今回もオーディオに詳しいお客様からの情報で自分で買って試してみましたが、まず間違いなく人に勧める事ができますね。

    音を良くする事にもそこまで大金は掛からないと思います。

    必要な所をしっかり対策すればまず間違いなく音を良くする効率が高くなります。

    変な効果が良く分からない素材を買って試すよりもまずは「部屋の防音」「部屋のアース工事」が一番効果があります。
    高価なスピーカーも音が良くない部屋で鳴らせば音が悪くなります。

    次に「有名な物を使用しない」かと思います。
    有名だから良い物ではありません。売れる為に有名にしたと言った方が正しいかもしれません。
    大体は高額で物を売る為に努力した商品です。
    本当に良い物は大体埋もれています。

    健康と同じで「変な物を食べない方が健康になる」と同じです。何を食べるか?よりも基本は変な物を食べるのを辞めるのが基本です。

    ケーブルはモガミ製で良いし、電源ケーブルも2000~3000円で買える非メッキケーブルで問題ありません。
    高額な物を買える余裕があるなら電源トランス位でしょう。これもスズキッド等の物で良いと思います。
    恐らく多くの電源トランス商品はスズキッド等のOEMの様にも思います。

    オーディオにも正しい所にお金を使い、無駄な所にお金を使わない様にしましょう。

    その分、他に良い物を買って下さい。

    良い物とは「有名な物」「有名人が使っている物」「高額な物」ではありませんので注意して下さい。

    どんなジャンルにも共通していると思いますがお金を掛けないと良い物を手にいれられないのはウソだと思います。

    ありがとうございました♪


    There has long been a genre of “occult products” in audio, products that are now at the level of religious believers.

    There are products that cost several thousand yen for the cheapest and several million yen for the most expensive. What is the reason for such a large amount of money for the same product?

    There is no concrete proof of the effectiveness of these products, and all the information is based on personal subjectivity and stealth.
    In the end, even if you do research, you will not be able to reach the real information.

    As a result, it is an area where you can only find out by testing and checking for yourself.

    Because it is a field where you cannot tell whether it is true or false, those who do not have information turn into good gold-diggers.

    To be precise, it will be artificial marble, but we recommend this one because it has surprisingly good sound.

    If you buy it by the piece, 110 yen per piece, buy as many pieces of this as you can put on your speakers and use them.

    Of course, it is not a deal or nothing.

    Originally, I used Resoling for drums, as you can see in the past articles, but I learned about marble as an insulator with good sound, so I used it this time and decided to continue using it as it is because the sound quality is quite good.

    It is a marble, but it is “balanced” in terms of sound.

    There is no weird bias, so there is no impression of leaning toward the low frequency range or the high frequency range.

    The sound may be tight, but it is not harsh.
    The sound separation will be better, so it should be easier to see the sound of the instruments than in the original state.

    The sound separation will also improve, so the sound is definitely better, first of all, as a material that can be bought for 110 yen.

    And as for insulators, a set of insulators should cost about 3,000 yen at the cheapest, so it is definitely the best sounding material in terms of price.

    However, this kind of information is not available even if you look for it.

    I bought some myself based on information from a customer who is an audio expert, and I tried it out, but I can recommend it to others without a doubt.

    I don’t think it costs that much money to improve the sound.

    If you take the necessary measures, the efficiency of sound improvement will definitely increase.

    Rather than buying strange materials with unknown effects and trying them out, “soundproofing the room” and “grounding the room” are the most effective first.
    Even expensive speakers will sound bad if played in a room with poor sound quality.

    Next, I think it is important to “avoid using famous products.
    Famous does not mean good. It may be more correct to say that they are made famous in order to sell well.
    It is the same as with health: “You will be healthier if you don’t eat strange food. What to eat? The more basic principle is to quit eating strange things.

    Cables should be made by Mogami, and power cables are fine with non-plated cables that can be bought for 2000-3000 yen.
    If you can afford to buy something expensive, it would be a power transformer. This should also be from a company such as Suzukid.
    Many power transformers are probably OEM products of Tin-Kid and others.

    Spend your money on the right parts of your audio system, and don’t spend it on unnecessary things.

    Buy something better for your money.

    Please note that “good” does not mean “famous”, “used by famous people”, or “expensive”.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar






    IMG20231120181102
  • BOSS GT-10 ヘッドフォンジャック交換

  • 2024/04/26
  • Category:
  • IMG20231120181158

    BOSS製GT-10のヘッドフォンジャック交換です。

    ヘッドフォンで使用ができなくなったとの事です。

    内部を確認してみるとヘッドフォンジャックの足が折れて破損していました。

    正直そこまで丁寧に作られている物とは思えないので耐久性は低いと思います。
    機器類の端子関係はよく使う所が壊れる事が多いと思います。

    同じパーツがありませんので、手持ちの入る物を付け配線して修理しました。

    端子が多いジャックなのですが実際に繋がっている所は3カ所だけなのでステレオジャックで流用可能です。

    交換後は無事に直りました。

    ありがとうございました♪

    IMG20231120180349


    This is a headphone jack replacement for a BOSS GT-10.

    The user said that he could no longer use it with headphones.

    The headphone jack was broken and the legs were damaged.

    To be honest, I don’t think it was made with that much care, so I think its durability is low.
    I think that the terminals of devices often break in the places where they are used most often.

    Since there are no identical parts, we repaired the jack by attaching and wiring with what we had on hand.

    The jack has many terminals, but only three are actually connected, so a stereo jack can be used.

    After the replacement, the problem was fixed.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    IMG20231218203142
  • Paul Reed Smith McCarty ナット溝切り調整&セットアップ

  • 2024/04/25
  • Category:
  • PRS製マッカーティのナット溝切り調整・セットアップです。

    10-52弦でドロップCにセットアップです。
    ナットが変わっている様で、別のギターのナットをそのままの状態で付けている様子です。

    電装系が交換されておりPUも変わっている様子、フロントボリュームがおかしい状態なのですが今回は保留されました。

    ダウンチューニングは太い弦を使用するのが必須となります。
    張力が下がるので弦の太さで補わないといけません。
    その為にはナットの溝を広げて調整しないといけませんが、これをする事で張力を保ちダウンチューニングでも音程感のあるサウンドになります。

    特に弦張力が低いと弦を押さえた際に引っ張り易くなり、弦を押さえた時点で音程が上がり易くなり汚い音になります。
    演奏も難しくなるので、ダウンチューニングは太い弦を使用しナット溝切り調整を行って仕上げましょう。

    ありがとうございました♪


    This is a PRS McCarty nut groove cut adjustment and setup.

    It is set up in drop C with 10-52 strings.
    The nut seems to have been changed, and it looks like the nut from another guitar is still attached as it is.

    The electrical system has been replaced, the PU has been changed, and the front volume is not right, but it was put on hold this time.

    Down-tuning requires the use of thicker strings.
    The tension is reduced, so the thickness of the strings must compensate for this.
    To do this, the groove in the nut must be widened and adjusted, which maintains tension and gives a pitchful sound even when down-tuned.

    Low string tension makes it easier to pull the strings when they are pressed, and when the strings are pressed, they easily rise in pitch, resulting in a dirty sound.
    It is also more difficult to play, so use thicker strings and adjust the nut groove when down tuning.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    IMG20240422214721
  • 楽器業界の情弱搾取ビジネスモデル「シールドケーブル」「ハンダ」mogami 3368

  • 2024/04/24
  • Category:
  • 000000005972_I1we1EK

    モガミ製3368の製作依頼です。

    モガミ製品は昔から音質が良く低価格帯で定番のケーブルメーカーですので、分かってる人はまずモガミ製を選択すると思います。

    理由はハッキリとしていて、モガミ製品とその他メーカー製品の値段を比べたら「他のメーカー製品は高額過ぎる」からです。
    高額だけならまだ良いのですが、音質の面でも良くないので特に頑張って購入するメリットを感じる所がありません。
    モガミ製以外に選択する理由はまず無いと言って良いでしょう。

    しかしココもまた隙間産業、特に楽器業界のオカルト信者はオーディオオカルト以上でその割合も非常に多い様に思います。
    簡単に騙される人が多いので、非常に購入する側の質が悪い場となっています。

    「有名なメーカー品だから」と買う人、「高額な物だから良い物に違いない!」と思い込んでいる人、「有名な人が絶賛していた&使用しているから」と真に受ける人。

    普段から何も考えない調べない勉強しない人は良い金ヅルです。
    お金儲けだけの商売を始めるなら、こうした人達に向けたビジネスをされた方が良いかもしれません。

    私よりもずっと先に昔から本当の事を言う人達は全然存在していたのですが、多くの方は信じずスルーしていった歴史もあるので中々人の思考は簡単には変わらないと痛感してます。
    だからこそ騙し易いのでしょう。少し調べたら矛盾が生じる効果を売りにしていても何故か売れてしまう商品が出てきます。
    これら環境になってしまった原因は完全に消費者側が悪いので、調べたり勉強したり自分で確認する行動するなりして誰が正しい事を言っているのか?の段階まで自分で進まないといけません。

    ~モガミは購入できるケーブルで唯一まともな物~

    モガミ製品は値段と性能がまず間違いなく一致しています。

    私も使用していて室内用でなら絶賛している2497、ライブ等では3368がお勧めです。

    ケーブルは「消耗品」です。1度買って永遠に使用できる物と思わない方が良いです。
    確実に劣化するので音が悪くなっていきます。
    使用頻度により3~5年で交換が普通の商品です。

    それらを考えたら高額なケーブルは定期的に交換する事を考えると非常にコストパフォーマンスが悪いです。
    それに加えて音も良くないなら猶更です。

    モガミは音も良く安いので消耗品として非常に理に適っています。

    ~組み合わせするプラグが重要~

    fp-703_800

    プラグにFP703が重要です。

    高額ですが、様々なプラグを使用して一番良い物がコレになります。

    ~ハンダは最強の情弱アイテム~

    ヴィンテージハンダ、有名なハンダ、個人の有名っぽい人のハンダなど…。

    申し訳ございませんがハンダ性能を売りにした商品にまともな物は存在しないと思います。
    いろんな物を実際に使用して試しましたけど、まず音が良くありません。

    音は変わるけど、大体はどこかしらの帯域が削れるので音が悪く変わるからです。

    それでいてメートル単価が高過ぎる。
    だったら安物のハンダの方がまず性能が上になるので買うメリットが一つもありません。
    安物ハンダの方が音に変化を与える要素が少ないので、音が悪い方へ変わる事自体がダメな物の証明です。

    そもそも音に影響を及ぼしているのは「ハンダ付け技術」が他要素としてある事も考えないといけません。
    ハンダ付け技術が下手なのに良い物を使用して作業して100%性能が出ている状態で組めると考えないで下さい。
    正しく組めるのは知識以前に大前提の話です。

    i-img1200x900-1705736859zzfuq365599

    散々試しての結果として、音が良いハンダはプラチナハンダだけです。

    他のハンダを持っていたらコレに買い替えて、以降はこのハンダで製作をして下さい。
    まともな感覚が残っていたら言ってる理由が分かるはずです。

    高額なハンダで本当に良い物はコレ位しか私は知りません。

    ハンダは外野から見ていると「人は洗脳し易いんだな」と分かる様なジャンルです。
    使用しないと分からない・組み込みに腕も必要なので気軽に自分の楽器に使用できない事から妄想だけが膨らみ「もっと音が良くなるのでは…?」と期待値を上げてくれます。
    そして結果的に音が悪くなったとしてもそもそも知識が無い+ゴールが見えていないので「コレが良い音なんだ!」と信じてくれるので、売る側にとって非常に良い分野なのでしょう。

    ~3368と2497で大体の問題は解決する~

    多くの方は洗脳されているので正しい判断ができません。
    それを前提に話をしているので、私は読む・見る人の治療だと思って記事を書いたりYoutubeで発信しています。
    見る見ない、信じる信じないも勝手です。こちらから信じて下さい!お願いします!というスタンスで発信していません。
    Youtubeを見てる人・ブログ記事を読んでる人をお客様として扱っていません。
    せっかくここまでたどり着いた情報なのにスルーしてしまうなら、どうぞこれからも搾取され続けて下さい。

    「音が良い」という概念も良くできていて、元が良くない所からスタートさせるからこそ微妙な変化で商売する手段が多く取れるのでとても効率が良い商売です。
    知識が無い人はゴールが見えないので、ずっといろんな物を買っては買い替えを繰り返して商品を買い続ける良いカモとなるでしょう。
    それでいて人は感情があるので変な情報を与えて迷わせる事で、趣味趣向を毎回変化させて新しい商品を自ら買ってしまう誘導が成立できてしまいます。
    患者の問題を永遠に解決させず、ずっと商品を買い続けて迷い続けていた方が都合が良いからです。その間はずっと商品が売れ続けますから。

    まず良い物を使用する事からスタートして下さい。
    「良い物」とは「有名な物・有名人が使っている物・高額な物では決して無い」とだけ頭に入れて下さい。
    その殆どは一般人にはあまり知られずにいるマイナーメーカーな事が多いです。

    室内だけの使用なら2497で良いでしょう。私はこのケーブルを知った瞬間から身の回りの配線を全て2497に入れ替えたレベルです。
    しかし耐久性に問題があるケーブルなので、基本的に動く環境には向きません。
    そこで3368です。外に持って行くケーブルはコレで充分です。

    身の回りの機材に無駄なお金を掛けず、その浮いた分で他に回した方が正しいお金の使い方です。
    別に私に頼め!や私から買え!と言ってる訳じゃありません。
    私以外の人にこれらケーブルを作らせてチェックしても全然構わないです。
    ただしまともな腕を持っている人に製作を頼んだ上でチェックするのだけは大前提です。

    上記にもありますが信じる信じないはそれぞれの勝手です。
    ただし自分で使用してから答えを決めて下さい。
    自分で試す・確認をしていないならその考えや意見に何も価値はありません。
    それをせず生きてるから人として成長しないんです。
    実際に行動して答え合わせをして下さい。
    だからあなたは騙され続けて搾取されるのです。

    結果として多くの方が対して良くもない物が広告ビジネスで買われてしまうので「良い物を作って頑張っているメーカーがダメになる」環境になっている事が私にとって許せない事とだけ覚えていて下さい。
    その無知から来る間違った選択により良いメーカーが滅んでいく意識を持って下さい。

    どうでも良い物を販売しているメーカーが倒産するのは良いでしょう。それならむしろ喜ばしい事です。
    しかし良い物を製造していたメーカーが倒産してしまったら私も困ります。私も良い物が買えなくなるからです。
    自己中心的な事かもしれませんがもしモガミが潰れたとしたら「お前ら何やってんの?お前らが買わないから潰れてしまったんだぞ!良い物を買えよバカ!何で分からねーんだよ?お前らの責任だぞ!」とハッキリと言ってしまいます。それが事実ですから。
    正しい環境になるには消費者の知識レベルを上げていかないといけません。
    そうでないと「ズルした人が得をする。真面目な人は損をする社会」がずっと続く結果になります。
    だから情報を持たない人は搾取される社会ができてしまうのです。
    元からまともな消費者ばかりの世の中なら悪い企業は到達されて生き残れないので、結果的にお店に並ぶ商品は全て良い物で統一され情報を持たなくても良い物を自然と手にする場になります。

    本当に情弱を卒業して下さい。勉強して下さい。
    ハッキリ言って勉強しない人・情弱は他人にも迷惑を掛ける犯罪行為でもあります。
    ハッキリ分かり易く伝えるなら存在が迷惑です。良い物を世の中に広める邪魔をしているからです。
    そしていつまでも悪い物を買い続ければ悪い企業が成長し続け更なる被害者を増やす結果になるからです。
    これらは消費者側にも責任は発生しています。他人事に考えないで下さい。
    世の中を本当に良い方向へ変える為に自分の時間を使って勉強して下さい。

    ありがとうございました♪


    This is a request for a 3368 made by Mogami.

    Mogami products have long been a standard cable manufacturer in the low price range with good sound quality, so those who know what they are doing will first choose Mogami products.

    The reason is clear: when you compare the price of Mogami’s products with those of other manufacturers, “other manufacturers’ products are too expensive.
    If they were only expensive, it would be fine, but the sound quality is not good either, so there is no merit in trying hard to buy them.

    However, this is also a gaping industry, especially in the musical instrument industry, where there are more occultists than in the audio occult, and the percentage of occultists seems to be very high.
    Many people are easily deceived, and the quality of the buyers is very poor.

    Some people buy because the product is from a well-known manufacturer, others assume that because the product is expensive, it must be good. or those who take it seriously because “famous people rave about it and use it.

    People who usually don’t think, research, or study are good moneymakers.
    If you are going to start a business just to make money, you might as well do it for these people.

    People who tell the truth have existed for a long time before me, but many people did not believe them.
    That is why they are easy to deceive. If you do a little research, you will find products that somehow sell well even though they sell contradictory effects.
    The cause of this environment is completely the fault of the consumer side, so you have to investigate, study, and confirm for yourself who is saying the right things. You need to advance to the stage of “who is telling the right thing?

    Price and performance definitely go hand in hand for Mogami products.

    I recommend the 2497, which I also use and rave about for indoor use, and the 3368 for live performances.

    Cables are “consumables” and should not be considered as something you can buy once and use forever.
    They will deteriorate and the sound will deteriorate.
    It is normal to replace them after 3 to 5 years depending on the frequency of use.

    Considering these factors, expensive cables are very cost-effective when you think about replacing them on a regular basis.
    In addition, if the sound is not good, it is even worse.

    Mogami cables sound great and are inexpensive, so they make a lot of sense as a consumable.

    FP703 is important for the plug.

    It is expensive, but this is the best one using various plugs.

    Vintage solders, famous solders, solders from individuals who seem famous….

    I am sorry, but I don’t think there are any decent products that sell solder performance.
    I have actually used and tried many different kinds of solder, but first of all, the sound is not good.

    The sound changes, but usually some bandwidth is cut off, so the sound changes for the worse.

    And yet the price per meter is too high.
    If that is the case, there is no merit in buying cheap solder because it has better performance.
    Since there are few factors that affect the sound of cheap solder, the fact that the sound changes for the worse itself proves that it is a bad product.

    In the first place, we have to consider that “soldering technique” is the other factor that affects the sound.
    Please do not think that you can assemble a product with 100% performance by working with a good product while your soldering technique is poor.
    Correct assembly is a prerequisite before knowledge.

    As a result of many trials, the only solder with good sound is platinum solder.

    If you have any other solder, please replace it with this one and use this solder for production from now on.
    If you still have any sense of decency, you will understand why I am saying this.

    This is the only really good solder I know of that costs a lot of money.

    Many are brainwashed and cannot make the right decision.
    Since I am speaking on that basis, I write articles and transmit them on Youtube as a treatment for those who read and watch.
    It’s your choice whether you see it or not, or believe it or not. Please believe from here! Please believe us! I am not sending out messages with the stance of “Please believe me!
    I don’t treat the people who watch Youtube or read my blog posts as my customers.
    If you don’t believe in the information that we have provided, please continue to be exploited.

    The concept of “sound good” is also very well done, and it is a very efficient business because you start from a place where the original is not good, so you can have many means of doing business by making subtle changes.
    People without knowledge will be a sucker who keeps buying and replacing products because they cannot see the goal.
    And since people are emotional, they can be led to change their tastes and buy new products by giving them strange information and leading them astray.

    Start with the good stuff.
    Keep in mind that “good” does not mean “famous,” “celebrity,” or “expensive.
    Most of them are minor manufacturers that are not well known to the general public.

    For indoor use only, 2497 is fine. I have replaced all the wiring around me with 2497 from the moment I learned about this cable.
    However, this cable has durability problems, so it is not suitable for basically moving environments.
    That is where 3368 comes in. This is enough cable to take outside.

    It is the right way to spend your money.

    As mentioned above, it is up to each of you to decide whether you believe in it or not.
    However, please decide the answer after using it yourself.
    If you don’t, you won’t grow as a person.
    That is why you continue to be deceived and exploited.

    Please just remember that it is unforgivable to me that we are in an environment where “manufacturers who are doing their best to make good products are being ruined” because many people are buying products that are not good for them in the advertising business as a result.

    It is fine for a manufacturer who sells a good product to go bankrupt.
    However, if a manufacturer of a good product goes bankrupt, that is not good for me either.
    It may be self-centered, but if Mogami went out of business, I would say, “What are you guys doing? They went out of business because you guys didn’t buy their products! Buy the good stuff, you idiots! Why don’t you get it? It’s your fault!” I would say clearly.
    To be in the right environment, we need to raise the level of knowledge of consumers.
    Otherwise, “cheaters will gain. A society where serious people lose out” will be the result for a long time to come.

    Please really graduate from being weak-minded. Please study.
    To be frank, people who don’t study and are weak-minded are also criminals who cause trouble for others.
    It is also a criminal act that causes trouble to others, because it results in buying bad products, growing bad companies, and increasing the number of victims.
    Consumers are responsible for their own actions. Please use your time and study to really change the world for the better.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    IMG20231113185239
  • 月桃 Getto Guitar ストラトキャスター サドル交換&PG交換&ペグ交換&セットアップ

  • 2024/04/22
  • Category:
  • 月桃GettoGuitar製ストラトキャスターのサドル交換・ピックガード交換・ペグ交換・セットアップです。

    IMG20231113170457

    IMG20231113170501

    PG交換はセルロイド素材の物、ペグやサドルはヴィンテージパーツを再現したモデルの様です。

    近年の新しいギターは音がタイト過ぎるので、昔の様な天然素材や金属が柔らかいパーツを付けるとその硬さが緩和されてバランスが取れたりします。

    金属はGOTOH等のパーツだと硬いので音も硬くなりますがその分で強度が高く長持ちします。

    ありがとうございました♪


    Saddle replacement, pickguard replacement, peg replacement, and setup for a Stratocaster made by Gekko GettoGuitar.

    The PG replacement is made of celluloid material, and the pegs and saddle look like a model that reproduces vintage parts.

    New guitars in recent years sound too tight, so adding natural materials or soft metal parts like in the past can balance the hardness of the sound.

    Metal parts such as GOTOH are hard, so they sound harder, but they are also stronger and last longer.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    IMG20231129185211
  • Bacchus Custom Series バッカス GRACE セットアップ Mojotone/PW-HORNET

  • 2024/04/22
  • Category:
  • IMG20231129185219

    バッカス製GRACEのセットアップです。

    低価格ながら変わったPUが載ったモデルです。

    PUはMojotone製PW-HORNETとの事で4~6弦のポールピースしか調整できないモデルです。

    どうしてこの様な仕様なのか?非常に謎なのですが、普通に1~3弦は調整できる様にしてほしいです。

    特に1~3弦の音量バランスが非常に良い訳でも無いので、4~6弦は両方のポールピースが調整できると音色的に幅が出るので良いのですがそれならポールピース全て調整できる様にしてほしいです。

    PW-HORNETは製品単品で販売されていないPUの様なのでこのモデルオリジナル?の様です。

    ベアナックルPU等がポールピース全て調整できるモデルがありますが、これはフロント側とリア側で高さを上げる量を変えると音を柔らかくしたり硬くしたりもできるので音色の面で便利です。

    ありがとうございました♪


    This is a GRACE setup made by Bacchus.

    It is a low-priced model with an unusual PU on it.

    The PU is a Mojotone PW-HORNET and only the pole piece of the 4th to 6th strings can be adjusted.

    Why this kind of specification? It is a great mystery to me, but I would like to be able to adjust the 1st, 2nd, and 3rd strings as usual.

    The volume balance of the 1st to 3rd strings is not very good, so it would be good if both pole pieces of the 4th to 6th strings could be adjustable so that there would be a wider tonal range.

    I would like to have adjustable polepieces for all strings. It seems to be original to this model.

    There are models of bare-knuckle PUs, etc., where all the pole pieces can be adjusted, but this is useful in terms of tone because you can change the amount of height raised on the front side and the rear side to soften or harden the sound.

    Thank you very much… ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    IMG20231222211702
  • Ibanez Iceman PU位置修正&セットアップ

  • 2024/04/21
  • Category:
  • アイバニーズ製アイスマンのPU位置修正・セットアップです。

    今回はかなり神経質な内容なのですがリアPUの取り付けがズレているとの事で直してほしいという依頼です。
    チェックしてみるとリアPUが少し傾いて付いているのですが、お金を掛けてまで直すレベルでは無い状態です。

    この程度でしたら結構多いです。
    正直、この辺りは有名なメーカーでも高額なモデルでも結構ズレはありますので珍しくありません。

    特に低価格でしたら猶更ズレは結構あるのですが、実際に使用して問題が無いレベルです。
    稀にブリッジの位置がズレててオクターブの位置に違和感が出ているモデルもあったりしますが、本家G社カスタムショップ70~80万円モデル新品でブリッジ位置が間違っておりオクターブ調整が合わない物も平気で売っているのをこの場で確認した事もあり「今すぐ返品に行け!これは楽器として使用できない!」と言った事もありますので、いかに販売側の検品レベルがいい加減かよく分かりました。

    PU位置を直しましたが細かくチェックするとブリッジの位置も少しズレている様子です。
    調整には問題ありませんし弾く上で難を感じるレベルじゃないので、こうした小さな点は気にしない事が一番です。
    有名で高額なブランドでも非常に酷い物が新品で売ってたりする世の中なので、これは些細な事に思えてしまいます。

    ありがとうございました♪


    This is a PU position correction and setup for an Ibanez Iceman.

    This time, the client was quite nervous, but he asked us to fix a misaligned rear PU installation.

    To be honest, it is not uncommon to find a misalignment in this area, even in expensive models from well-known manufacturers.

    It is not uncommon for even the most expensive models to have some misalignment, especially if they are low-priced, but it is at a level where it is not a problem in actual use.
    There are rare models where the bridge is misaligned and the octave position is not correct, but I have seen a 700,000 to 800,000 yen new model from the original G Custom Shop that was sold with the wrong bridge position and the octave adjustment was not correct. I was able to understand how the level of inspection on the sales side was not good enough.

    I fixed the PU position, but upon closer inspection, the bridge position also seems to be a little off.
    There is no problem in adjusting it, and it is not at a level where I feel any difficulty in playing it, so it is best not to worry about such a small point.
    In a world where even famous and expensive brands can be sold new in very bad condition, this seems like a small thing.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar