• PXL_20251205_104439400
  • Ibanez ehb1005sms PU配線変更 シリーズ配線→パラレル配線に変更 bartrini bh2
  • 2026/02/09
  • Category:
  • アイバニーズ製EHBのPU配線変更です。

    PUの配線をパラレルに変更です。

    シリーズ配線だとパワーが強いが高域の潰れが大きく、中低域が強く音の形が悪い結果になります。
    出る音を聞いてもパワーはあるが音が硬く馴染みが悪そうな音です。

    パラレルに配線を変更すると全体のバランスが良く、音も柔らかくなりました。

    PUが4芯の場合はシングル・パラレル・シリーズと音を変える事が可能です。
    音が気に入らない場合は変更してみる事をお勧めします。

    ありがとうございました♪


    Modifying the pickup wiring on an Ibanez EHB.

    Changing the pickup wiring to parallel.

    Series wiring delivers strong power but causes significant high-frequency roll-off, resulting in overly emphasized mid-low frequencies and poor tonal balance.
    Listening to the output reveals power but a harsh, unnatural sound that lacks warmth.

    Changing to parallel wiring improves overall balance and produces a softer, more natural tone.

    With a 4-conductor pickup, you can switch between single-coil, parallel, and series modes to alter the sound.
    If you dislike the sound, I recommend trying this modification.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




BLOG CATEGORY

ARCHIVE