タグ別アーカイブ: Ibanez

    PXL_20250918_081736767
  • Ibanez Prestige AZ2402 セットアップ ローステッドメイプル

  • 2025/11/26
  • Category:
  • アイバニーズ製プレステ-ジAZ2402のセットアップです。

    ローステッドメイプルのモデルです。

    新品購入との事ですがトラスロッドの余り量が少ない状態です。

    近年はローステッドメイプルモデルのトラスロッドの余り量が少ない事が非常に多いので購入時は要注意です。

    最初から「トラスロッドの余り量が少ない」という意味は「順反りが大きい(元のネック反りが大きい)のを直した状態」という事です。
    もしくは「ネックが柔らかい」ので弦を張っただけで「大きく順反りする」ので、調整の為だけに多くのトラスロッドを使用する事から少ない、この2パターンです。
    どちらにしても長い目を見たら長持ちしない状態と言えるので、購入時にトラスロッドの余り量が多い物を購入するという事は上記の難点が無いネックと判断できるので買う側としてはメリットが大きいです。
    逆に上記の状態を購入してしまうと長持ちしない状態と言えるので損する形となります。

    必ず購入前に楽器屋でその場で状態をチェックさせ、実際に問題が無い事を見せてもらってから購入しましょう。

    弾き易く音が良い個体でした。

    ありがとうございました♪


    Setup for the Ibanez Prestige AZ2402.

    This is the Roasted Maple model.

    Although purchased new, the truss rod has very little adjustment range left.

    In recent years, it’s become very common for Roasted Maple models to have limited truss rod adjustment range, so be cautious when purchasing.

    “Limited truss rod adjustment range” from the start means either:
    1. The neck was adjusted to correct significant forward bow (large original neck bow).
    2. The neck is soft, causing significant forward bow just from string tension, requiring substantial truss rod adjustment for correction.
    Either way, this indicates a condition unlikely to last long-term. Therefore, purchasing a guitar with ample truss rod adjustment range upfront allows you to judge the neck as free from these issues, offering significant benefits to the buyer.
    Conversely, purchasing a guitar in the above condition means acquiring a neck unlikely to last, resulting in a disadvantageous purchase.

    Always have the condition checked on-site at the music store before buying. Ensure they demonstrate there are no actual problems before making your purchase.

    It was an easy-to-play instrument with great tone.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250502_082816250
  • Ibanez RG フレットすり合わせ&配線直し

  • 2025/10/07
  • Category:
  • アイバニーズ製RGのフレットすり合わせ・配線直しです。

    センターPUが壊れており音が出ない状態です。
    フレットも消耗が全体的に大きい状態です。

    お客様との相談で電装を全て交換・3Wayセレクター仕様にしてフロントとリアで鳴る仕様となりました。

    フレットをすり合わせする事で演奏も良い状態で弾ける事となりました。

    モダン系サウンドかと思いましたが音が柔らかく、クリーンでも良いサウンドが出せる個体です。
    昔は日本製アイバニーズも低価格帯で良い個体が大量生産されていただけに中古品でもお勧めできる個体です。
    ただ補強材も入っていない薄いネックは状態が悪い事も多いので購入時は注意したいポイントです。

    ありがとうございました♪


    Ibanez RG fret leveling and rewiring.

    The center pickup is broken and not producing sound.
    The frets show significant overall wear.

    After consulting with the customer, we replaced all electronics and converted it to a 3-way selector configuration, enabling sound from both the front and rear pickups.

    Fret leveling has restored the guitar to a playable condition.

    While expected to have a modern sound, it actually produces a soft tone and delivers excellent clean tones.
    Given that Japanese-made Ibanez guitars were once mass-produced at affordable prices with good quality, this used model is highly recommended.
    However, the thin neck without reinforcement often deteriorates quickly, so this is a key point to check when purchasing.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250429_083149778
  • Ibanez SR セットアップ

  • 2025/08/18
  • Category:
  • アイバニーズ製SRのセットアップです。

    逆反りで音詰まりしている状態です。

    調整する事で音詰まりもせず弾き易い状態に仕上がりました。

    IbanezのSRシリーズは低価格帯でも非常に良く、弾き易く音が良いモデルが多いです。

    数万円のモデルでも使用上で問題無い他、音質も良くアクティブ回路搭載のモデルは音作りもし易いので非常にコストパフォーマンスが高いです。

    ありがとうございました♪


    This is an Ibanez SR setup.

    The sound was muffled due to reverse bowing.

    After adjustment, the sound is no longer muffled and the guitar is easy to play.

    The Ibanez SR series offers excellent value for money, with many models that are easy to play and produce great sound, even at lower price points.

    Even models costing several thousand dollars perform well in use, and those with active circuits offer excellent sound quality and are easy to customize, making them highly cost-effective.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250417_084819426.MP
  • Ibanez Iron Label RG RGIF8 ナット交換&フレットすり合わせ&セレクター交換 ファンドフレット

  • 2025/08/15
  • Category:
  • アイバニーズ製アイアンレーベル8弦RGのナット交換・フレットすり合わせ・セレクター交換です。

    ナット消耗で音詰まりしており、フレット浮きとネックウネリで音詰まりしています。

    セレクターが消耗で音が出なかったりと、かなり消耗が大きい個体です。

    ナットを交換しフレットをすり合わせ、セレクターを新品に交換し問題が無い状態に仕上げる事ができました。

    消耗状態が大きいと直った後で見違える弾き易さに変化したと思います。
    ファンドフレットですと恐らくメーカー側も製造する個体が少ない事から、元から作りの面で精度が悪いかもしれません。
    なのでファンドフレット仕様は新品でも状態が良くない可能性がある事も考えておかないといけないかもしれません。
    とは言っても新品で高額な楽器でも最初から状態が悪い事もあるので、基本は買ったらナット・フレットはリペアする考えでも大げさではありません。

    ありがとうございました♪


    This is a nut replacement, fret leveling, and selector replacement for an Ibanez Iron Label 8-string RG.

    The nut was worn out, causing sound blockage, and the frets were floating and the neck was warped, also causing sound blockage.

    The selector was worn out, causing sound issues, and the instrument was in pretty bad shape overall.

    We replaced the nut, leveled the frets, and replaced the selector with a new one, bringing the instrument back to a problem-free condition.

    With such severe wear, I believe the playability improved significantly after the repairs.
    With fretboard frets, it is possible that the manufacturer produces fewer units, so the precision may be poor from the start.
    Therefore, it is important to consider that even new instruments with fretboard frets may not be in good condition.
    That said, even new, high-priced instruments may have issues from the start, so it is not unreasonable to consider repairing the nut and frets after purchase.

    Thank you very much!


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250403_092600565
  • Ibanez Gio セットアップ

  • 2025/08/01
  • Category:
  • アイバニーズ製ジオのセットアップです。

    かなり大きい順反りで弦高が高い状態です。

    低価格帯モデルですが近年のモデルは弾き易く、特にトラブルも昔と比べ殆ど見られなくなったので初心者用にお勧めできるモデルです。

    調整し弾き易い状態に仕上げる事ができました。

    またお客様の要望で弦は古いままで調整する事となりましたが1弦のオクターブが変な位置となりました。
    低価格帯の弦等は新品でもオクターブの位置が変になる事も多いですが、古い弦でも同じ様に「大体はこの位置にくる」所から大きく外れてきます。
    消耗品なので新品弦で調整した方が絶対に良いですが、近年は弦の料金も高額になってきて気軽に交換も難しくなってきました。

    ありがとうございました♪


    This is an Ibanez Geo setup.

    It has a fairly large reverse bow and high string height.

    Although it is a low-priced model, recent models are easy to play, and there are almost no problems compared to older models, so it is recommended for beginners.

    We were able to adjust it to make it easy to play.

    Additionally, at the customer’s request, the strings were left as they were for adjustment, but the octave position of the first string became irregular.
    Even with new strings in the lower price range, the octave position often becomes irregular, but with old strings, it deviates significantly from the typical position.
    As they are consumables, adjusting with new strings is definitely better, but recently, the cost of strings has increased, making it difficult to replace them casually.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250203_095023442
  • Ibanez AZ24027-TFF AZ7 ナット溝切り調整&セットアップ ローステッドメイプル

  • 2025/07/15
  • Category:
  • アイバニーズ製AZ7のナット溝切り調整・セットアップです。

    新品の日本製モデルです。
    約30万円するモデルですがその割にはナット高が高い、チューニングが狂い易いとの事で持ち込まれました。

    最初に触ってみるとブリッジがアームを使用すると元の位置に戻り難い状態です。
    これには様々な要因がありますが弦が触れてる全てに原因が出てきます。
    ナット高も高いので溝切り調整を行い、その他でいろいろ試したがスタッドとナイフエッジ・スタッドに不具合かスプリングの問題そうです。
    ブリッジ位置が元に戻り難いのでアームダウンすればチューニングが低くなりアップすればチューニングが高くなります。

    最初からトラスロッドに余裕が少ない状態です。
    近年は木材強度が低過ぎるので最初からトラスロッドに余裕が無い事が多いので購入時には店員にチェックさせて購入しましょう。

    ありがとうございました♪


    Ibanez AZ7 nut groove cut adjustment and setup.

    This is a brand new Japanese model.
    It is a 300,000 yen model, but it was brought to us because of its high nut height and easy to go out of tuning.

    The bridge is not easily returned to its original position when the arm is used.
    There are many factors that can cause this, but everything that the strings are in contact with can be the cause.
    The nut height is high, so I adjusted the groove cut and tried everything else, but it appears to be a stud and knife-edge stud problem or a spring problem.
    The bridge position is hard to get back to the original position, so if the arm is down, the tuning will be lower, and if it is up, the tuning will be higher.

    The truss rod has little room to spare from the start.
    In recent years, the strength of wood is too low, so there is often not enough room in the truss rod from the beginning.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250319_082315813
  • Ibanez J-Custom フレットすり合わせ

  • 2025/07/01
  • Category:
  • アイバニーズ製Jカスタムのフレットすり合わせです。

    昔のJ-Customモデルです。
    ネックが大きく波打ちしており音詰まりが起きています。
    昔のモデルなので現行品の様なチタン補強材は入っていないモデルと思いますので、薄いネックは将来の事を考えると長持ちするのは難しいでしょう。

    音詰まり箇所はすり合わせで直したが完璧に真っ直ぐにしようと削るとフレットが部分的にかなり少なくなる為、ある程度の所で留めています。
    薄いネックが長年使用しているとここまで変形してくる例として学びがありました。

    ネック厚が薄いなら購入時から弦を緩めて保管する等して正しく保管できていないと長期に渡りまともな状態を維持できません。

    音詰まりが無くなり問題無く弾ける状態になりました。

    また元からナット高が高く、すり合わせ後も高いままの状態です。
    フロイドローズの場合だとナットは削って調整ができず、指板を削って高さを調整する事になります。
    この高さはメーカーの精度により大きく異なりますが、国産でも昔のモデルはそこまで良い状態で仕上がってはいない様子です。
    弾いてて気になる場合はフロイドローズ用のナット高調整が必要です。

    ありがとうございました♪


    This is an Ibanez J-Custom fret grinder.

    This is an old J-Custom model.
    The neck is heavily wavy and sound clogged.
    I think this is an old model and does not have titanium reinforcement like the current model, so the thin neck will not last long in the future.

    The sound jamming point has been fixed by grinding, but if we try to straighten it perfectly, the frets will be very little in some parts, so we have kept it at a certain point.
    I learned this as an example of how a thin neck can become so deformed after years of use.

    If the neck is thin, it will not stay in decent condition for a long time if it is not stored correctly, for example, by keeping the strings loose from the time of purchase.

    The sound jamming is gone and the guitar can be played without any problems.

    The nut height was originally high, and it remains high even after the nut has been adjusted.
    In the case of Floyd Rose, it is not possible to adjust the nut height by shaving the fingerboard.
    This height varies greatly depending on the accuracy of the manufacturer, but it seems that old models are not finished in such good condition even if they are made in Japan.
    If you are concerned about this when playing, you need to adjust the nut height for Floyd Rose.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250227_085226271
  • Ibanez RGD Standard ナット溝切り調整&セットアップ

  • 2025/06/23
  • Category:
  • Ibanez製RGDスタンダードのナット溝切り調整・セットアップです。

    ダウンチューニング(ドロップG#)で調整する内容です。

    太い弦を張る場合はナット溝に弦が入りませんので溝切りが必須となります。

    使用する弦は68-13弦となります。

    溝切り後のセットアップ後は音抜けが良く無駄な音が出ないクリーンサウンドで音の形がダウンチューニングでもかなり見え易い状態になりました。
    大体のプレイヤーは弦が細いので、ダウンチューニングには可能な限り太い弦を使用しましょう。

    ありがとうございました♪


    This is a nut groove cut adjustment and setup for an Ibanez RGD Standard.

    This is an adjustment for down tuning (drop G#).

    When thick strings are used, it is necessary to cut the nut groove because the strings will not fit in the nut groove.

    The strings used are 68-13 strings.

    After the groove cutting, the sound is now clean with no wasted sound, and the shape of the sound is now quite visible even in down-tuning.
    Most players have thin strings, so use thicker strings for down tuning whenever possible.

    Thank you very much… ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250317_103246290
  • Ibanez SIX7FDFM セットアップ

  • 2025/05/18
  • Category:
  • アイバニーズ製SIX7FDFMのセットアップです。

    弦高が低く音が詰まり気味の状態です。
    前オーナーの速弾き仕様になっているのか知りませんが余りにも弦高がベタベタに低いとまず鳴らすのが難しいです。

    適切な状態に調整し、特に不具合無く弾ける状態に仕上げました。

    低ければ低い程に弾き易くなりますが音質が失われていきますので、この辺りのバランスは人それぞれに好みがありますので自分に合わせた調整が正しい調整となります。

    ありがとうございました♪


    This is an Ibanez SIX7FDFM setup.

    The string height is very low and the sound is very clogged up.
    I don’t know if this guitar was designed for fast playing by the previous owner, but it is difficult to play if the string height is too low and sticky.

    We adjusted the strings to the proper height and made it playable without any particular problems.

    The lower the string height, the easier it is to play, but the more sound quality is lost, so the balance between the two is a matter of personal preference, so the correct adjustment is one that suits you.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250315_083839319
  • Ibanez RG460DX-ROM Roadster Orange Metallic RG セットアップ

  • 2025/05/11
  • Category:
  • アイバニーズ製RG460DXのセットアップです。

    新品で購入したが音詰まり箇所があり調整に持ち込まれました。

    状態を確認すると4フレットで音詰まりが発生しており、5フレットだけ高い状態で4フレットが音詰まりする状態です。

    新品でもこうした不具合があるまま平気で販売されている事があるので、購入前に店員にチェックさせて買うのは当然ですがお店側が素人だと不具合に気が付きません。

    酷いお店だと初期状態の弦高が高く、弦高を高くすれば不具合箇所が誤魔化されるので音詰まりが分かり難くなります。
    なので弦高が高い時点で疑った方が良いです。
    購入後に指摘しても「当店での基準はこの弦高で不具合が出なければ問題無いと判断してます。」と誤魔化されて終わりです。

    不具合箇所が分かれば新品なら1年保証等が付いているので、基本は早い方が良いですが不具合を発見した際は購入店に申し出て直してもらいましょう。

    ただし相手が素人過ぎるとこうした圧倒的に誰でも分かる不具合ですら店員が不具合を分からない現象が起きて対応してくれない事が出てきます。
    実際にこの個体はリピーターのお客様のギターの為、後日に別のギター持ち込み時にお客様からこのギターは初期不良で返品した報告を聞いた際の購入した楽器店のやり取り話を聞きました。

    この音詰まりする状態でも楽器店側は「メーカーが送ってきた状態なので、状態は基準の範囲で問題無い」との事や「他リペアショップでチェックさせても構わない」とまで言われたそうです。
    ちなみにギター本体はお店に送ってあり店員が確認した状態での連絡です。そのやり取りメールも確認しました。

    私のお店でチェックした事はお客様が購入店に伝えてなかったそうですが、楽器店側の素人さがここまで来てると買うのが危険なレベルになっています。
    この個体はそこまで高額なモデルではありませんが、万が一高額なモデルを購入してアフターサービスがここまで酷いと楽器は楽器屋で買う事が難しくなってきます。

    楽器屋で買う際も基本的に知ってほしい知識としてちゃんと調整した上で渡してもらう事、トラスロッドの余り量を確認させる事、そもそも新品でトラスロッドの余り量を表示しないなら買わない事、不具合が起こった場合はどの様な対応をするのか必ず確認する事です。

    今回は何度もメールのやり取りの上でやっと返品できたレベルとの事で、明らか商品に不具合があるのに返品する事すら困難という事例をお客様から見せてもらいました。

    楽器屋をやってる人達へ向けて、もう少し自分の仕事にプライドを持って下さい。
    金儲けしか考えていないならこの仕事を辞めて下さい。業界として害悪な存在です。
    人が泣いて金を儲けてるなら仕事としてのやり方が完全に間違っています。
    良い仕事をして喜ばせた対価としてお金を稼いで下さい。

    ありがとうございました♪


    This is a setup for an Ibanez RG460DX.

    It was purchased new but brought in for adjustment due to a jammed part.

    The condition of the guitar was confirmed to be clogged at the 4th fret, with only the 5th fret being high and the 4th fret being clogged.

    It is natural to have the store staff check the guitar before buying it, but if the store is an amateur, they will not notice the problem.

    If the shop is not a good store, the initial string height will be high, and if the string height is high enough, the defect will be disguised, so it will be difficult to recognize the sound clogging.
    Therefore, it is better to be suspicious when the string height is high.
    If you point this out after purchase, you will be misled and end up saying, “Our standard is that if there is no problem at this string height, we judge that there is no problem. If you point out the problem after purchase, you will end up being misled.

    If you find a problem, it is better to report it to the store where you purchased the instrument and have it fixed.

    However, if the store is too much of an amateur, there may be a phenomenon that the store staff does not understand the problem, even if the problem is overwhelmingly obvious to anyone else, and they may not be able to fix it.
    In fact, this guitar belongs to a repeat customer, and I heard a story about an exchange at the music store where the customer brought in another guitar and later heard a report that this guitar had been returned due to initial defects.

    Even with this clogged condition, the music store said that the condition was within the standard range because it was sent by the manufacturer, and that they were even willing to let another repair store check it out.
    Incidentally, the guitar itself was sent to the store and the store staff checked it. I also confirmed the email exchange.

    I heard that the customer did not tell the store of purchase that he had checked it at my store, but the amateurishness on the part of the music store has reached such a level that it is dangerous to buy it.
    Although this unit is not that expensive model, if you buy an expensive model and the after-sales service is this bad, it will be difficult to buy a musical instrument at a music shop.

    When buying from a music shop, the basic things you need to know are that you should have the instrument adjusted properly, that you should check the amount of truss rod left, that you should not buy a new instrument if it does not show the amount of truss rod left, and that you should always check what they do in the event of a problem.

    In this case, the customer told us that he was able to return the instrument after many emails, and that he found it difficult to return the instrument even though the product was obviously defective.

    To those who are in the music store business, please have a little more pride in your work.
    If all you care about is making money, get out of the business. You are a detriment to the industry.
    If you are making money by making people cry, you are doing your job completely wrong.
    Please do a good job and make money in return for pleasing people.

    Thank you.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




BLOG CATEGORY

ARCHIVE