タグ別アーカイブ: セットアップ

    ギターサムネ
  • 本当に正しいセットアップは「順反り・若干順反りで調整する事」なのか?

  • 2025/05/09
  • Category:
  • 度々お客様から聞かれる質問として「楽器屋や他店リペアショップでは順反り・若干順反りで調整した方が良いと聞くのですが、どうなのですか?」と聞かれたりします。

    まず世の中の正しい情報を確認する事として「一人だけから情報を得る事は危険」である事を知りましょう。
    私の発信にも同じ事が言えますので、私に対しても疑いの姿勢で見てもらって問題ありません。
    ハッキリ言える事として情報を得る事は大事ですが、情報をインプットしたら必ず確認作業(自分の楽器で試す等)をして実際に試して確認して下さい。

    大半の人達はアウトプットしてないから知識が無く、出てくる情報に簡単に騙されるのです。
    情報を得て「本当かどうか分からない」の段階に来たのなら後は簡単、自分で試せば良いだけ。簡単な話です。
    そんな簡単な事をしてないから騙され続けます。

    楽器関係で情報を出している人の特徴として「これが正義で他は間違っている」と善悪二元論で表すパターンが非常に多く、例えば「弦を緩めるか緩めないか?」もそうですが楽器状態を実際に確認しそこに合わせて行う作業な事にも関わらずそうした条件を全て度外視して「弦は緩めないで良い」という人達ばかりです。
    その証拠に弦を張りっぱなしで良いと言う人達はその理由を具体的に説明できません。
    大体は毎日弾くなら問題無いと言ったりしますが、例えばネックが柔らかく反り易い・既にトラスロッド限界状態等の楽器だったらどうするの?等、そうした細かく各個体の状態に合わせた保管方法等を説明してる人は私以外に見た事がありません。

    何か一点だけを強調し「正義と悪」の様に単純表現した方が分かり易く、ハッキリ言うと客側の多くが無知で騙され易い知識レベルなので有名な人が言うだけでその言葉を信じる人が大半なので自分で自分の楽器をダメにしているので情報を正しく判断できないし確認もしない消費者側が悪い所です。
    まずは消費者側、客側が悪いという意識を持って下さい。

    ~セットアップは順反りで行うべきか?~

    簡単な話です。ネック反りを順反り状態でセットアップしてみて下さい。

    自分が気に入ればOK、気に入らないならNGです。

    簡単な話です。
    この状態を「何故お前が決めてるんだ?」って話です。
    ただの「好みの問題だろ!」って事が正解です。

    何故こうした表現をしている所が多いのかはどこか1点を切り取ってそれを正義に見せた方が客が分かり易く洗脳し易く自分の商売がやり易いからです。

    順反りが良いとする人の理屈として「弦振動の振幅する範囲を考え、弦振動のスペースを取る為には順反りさせた方が良い」という理屈は正しいです。
    正しいのですが、これが「ギターベースを弾く人全員に当てはまる答えなのか?」が完全に抜け落ちています。

    当然ながら弦高がメチャクチャ低い状態が好みの人も居るでしょう。
    右手の力が弱く、弦を弾いて発生させる弦の振幅範囲が狭い人も居るでしょう。

    この辺りの人達を完全に削除した考え方になります。

    当然ながら順反り状態が良い人(弦高が高い人)も居る事でしょう。
    では正しい状態は何なのか?簡単です。
    その人が好む調整状態に仕上げる事が正解です。簡単な話でしょ?
    正しい調整状態は弾く人が決める事です。

    ~分からないなら猶更やってもらうべき~

    良く分からないなら様々なお店にお金を払っていろんな調整状態を体験して下さい。

    当たり前ですが勉強には「お金」が必要です。他にも自分で知識を付けて試す方法もありますが金を払って専門家にやってもらった方が早いです。

    結局は経験値であり、良い状態って感覚も人それぞれにあるので自分が良いと思う状態を探し当てないといけません。

    受け身はダメ、簡単にネットで聞くのもダメです。自分の楽器で確認して下さい。

    ネックの僅かな反り具合でも弾き心地は大きく変わりますし、弾き心地は良くても音が微妙な事もあるのでその弾き心地と音質バランスの好みを知る必要があります。

    この辺りの基準が分からないといつまで経っても一部が強調されたネット情報に騙され続けます。

    本当に正しい知識を紹介すると私の記事の様に長く複雑で様々な要因を紹介する事になるので、理解するにも知識が必要になり多くの方は1回読んですぐには理解できない内容になります。
    人は簡単な事に流れ、怠けたい生き物ですから完全に商品を売る側はその人間心理を突いて商売をしてきている事に気が付いて下さい。

    また「被害者意識」も今すぐ辞めて下さい。
    「私は素人だから」と言って楽をしてはいけません。
    今は調べたら専門家の解説へすぐに行き着く事ができますし、この記事に行き着いているなら他の記事も読んで学べばこの程度の内容は簡単に理解できます。
    つまり理解できないのはあなたの責任です。
    時間が掛かっても知識を得ようと行動してればいずれ理解できるようになるし自分がギターを買う際に失敗しない目利きが付く等して役に立てる所まで知識が付きますが、最初から「素人だから分からない」というスタンスならば成長しませんしどこかで痛い目を見てもそれはあなたが勉強しなかった事への責任です。
    そうした何も行動しない素人が犠牲になっているのが楽器業界の消費者です。

    ~結論~

    順反り状態でセットアップが良いのか悪いか?は自分でやってみて弾いて確認して決めて下さい。

    順反りさせるという事は弦高が高くなり弾き難くなります。
    弾き難く感じるかも人それぞれですから、また順反りと言葉にしてもその反り具合は言葉では表せられません。

    ネックの反りを真っ直ぐにすれば弦とフレットの平行具合が殆ど全体的に同じになるのでどこを押さえても弾き易いと感じるでしょう。
    ただ弦の振幅具合を考えると、弦が完全に鳴り切らない事となりますがエレキギターでそこまで考えた調整にする必要があるのか?と考えるプレイヤーも多いはずです。
    アコギだったら分かるけど、音よりも弾き易さを優先した方が良いと思う人やかなり歪ませたり速弾きしたい人にそこまで重要な要素なのか?等の基準はプレイヤーで大きく感覚が違います。

    結論として実際に触ってみてプレイヤーの答えが大きく異なるはずなので、調整の形として一つだけが正しくなる事は絶対にあり得ません。
    そう言ってる人はただのポジショントーク、自分を良く見せようとしてるだけです。
    少し考えたら上記の説明通りでおかしな話だなを分かるはずです。
    調整の良し悪しは人によって大きく違います。
    そこをコミュニケーションを取りプレイヤーの好みに合わせていくのが正しい調整方法です。

    知識は必ず必要になります。
    それと同時に自分で確認して学ぶ事も必要になります。
    騙されず正しい情報を得る為に。
    コスパ・タイパと言ってたらバカになるだけです。
    そうした人が増えた方が商売上有利なので利用されない様に勉強して下さい。

    ありがとうございました♪


    One question I am often asked by customers is, “I hear from music shops and other repair stores that it is better to adjust a forward or slightly forward warp.” What do you think?

    First of all, you should know that “it is dangerous to get information from only one person” as a way to confirm the correct information in the world.
    The same thing can be said about my communications, so there is no problem if you look at me with an attitude of skepticism.
    I can clearly say that it is important to obtain information, but after inputting the information, be sure to check it (e.g., by trying it out on your own instrument) and actually try it out to confirm it.

    Most people don’t have the knowledge because they don’t output the information, and they are easily deceived by the information that comes out.
    If you have reached the stage of “I don’t know if it’s true or not” after getting information, the rest is easy, just try it out yourself. It’s that simple.
    You continue to be deceived because you have not done such a simple thing.

    One of the characteristics of people who provide information on musical instruments is that they often use a dualistic view of right and wrong, saying that “this is right and the other is wrong,” and that “to loosen or not to loosen strings? For example, when it comes to “whether to loosen or not to loosen strings,” they are always saying “don’t loosen the strings,” disregarding all such conditions, despite the fact that it is a task that must be done after checking the condition of the instrument and adjusting it to the actual condition.
    As proof, those who say it is fine to leave the strings on cannot give a concrete reason why.
    For example, what if the neck is soft and easily warped, or the truss rod is already at its limit? I have never seen anyone other than myself explain in such detail how to store each individual instrument according to its condition.

    It is easier to understand if you emphasize only one point and describe it simply as “right and wrong.” To put it clearly, most of the customers are ignorant and gullible, and most of them believe what famous people say just because they say so. This is the consumer’s fault.
    First of all, please be aware that the consumer and customer side is at fault.

    It’s simple. Try setting up the neck warp in the forward warp state.

    If you like it, it’s OK, if not, it’s not.

    It’s that simple.
    Why are you deciding? I say, “Why are you deciding?
    It’s just a matter of taste! is the correct answer.

    The reason why many places use this kind of expression is because it is easier for customers to understand, easier for them to be brainwashed, and easier for them to do business with you if you cut out one point and make it look like you are doing it justice.

    The logic of those who say that forward bending is better is correct: “Forward bending is better for taking up space for string vibration, considering the range of amplitude of string vibration.
    This is correct, but the question “Is this an answer that applies to all guitar bass players?” is completely missing. is completely missing.

    Of course, there are those who prefer a very low string height.
    Some people may have a weak right hand and the range of string amplitude generated by plucking the strings may be narrow.

    This approach completely removes these people from the equation.

    Of course, there will be those who prefer forward warp (high string height).
    So what is the correct state? It is simple.
    The correct answer is to adjust the strings to the person’s preferred state of adjustment. Simple, isn’t it?
    The correct adjustment is decided by the player.

    If you are not sure, pay money to various stores to experience various adjustment states.

    Of course, you need “money” to learn. There are other ways to gain knowledge and try it yourself, but it is faster to pay an expert to do it for you.

    In the end, it is all about experience, and each person has their own sense of what is a good state, so you have to find the state that you think is good.

    Don’t be passive, and don’t simply ask on the Internet. Check with your own instrument.

    Even a slight warp of the neck can make a big difference in playing comfort, and even if it feels good, the sound can be subtle, so you need to know what you like about the balance between playing comfort and sound quality.

    If you do not know the standards in this area, you will continue to be deceived by information on the Internet, which emphasizes only some aspects.

    If you really want to introduce the correct knowledge, you will have to read a long and complicated article like mine, which will introduce various factors, and you will need knowledge to understand it.
    People are creatures that want to be lazy, and the sellers are trying to take advantage of this human psychology.

    Is the setup good or bad in the forward warped state? Please try and play it by yourself to confirm whether it is good or bad.

    If the strings are bowed forward, the string height will be higher and it will be more difficult to play.
    It depends on each person whether it is difficult to play or not, and the degree of warp cannot be expressed in words.

    If the neck is straight, the parallelism between the strings and frets will be almost the same all over, so it will feel easy to play no matter where you press the strings.
    However, considering the amplitude of the strings, the strings will not fully sound. Many players may wonder if it is necessary to make such adjustments on electric guitars.
    I can understand if it is an acoustic guitar, but is it really that important for those who prioritize playability over sound, or for those who want to distort the sound or play fast? The criteria for this differ greatly from one player to another.

    In conclusion, players’ answers must be very different when they actually touch it, so it is absolutely impossible for one form of adjustment to be correct.
    Those who say so are just position talk, trying to make themselves look good.
    If you think about it for a moment, you will see that it is just as I explained above, which is crazy.

    Knowledge is always necessary.
    At the same time, you need to check and learn for yourself.
    To get the right information, not to be deceived.
    If you say “cosmetics,” “cosmetics,” and “typa,” you will only become a fool.
    The more people who do so, the better for business, so please learn not to be taken advantage of.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250426_094959314
  • Squier by Fender Classic Vibe 60s Stratocaster セットアップ

  • 2025/05/07
  • Category:
  • Youtubeでも紹介しましたスクワイヤー製クラシックヴァイヴ60年モデルストラトキャスターのセットアップです。

    2025年製の新品です。
    こちらの個体は特に初期状態でも不具合が無く、調整初期状態も他メーカーと比べ良かったです。
    トラスロッドの余り量も充分にあり良好な個体でした。

    調整してみると弾き易く、何よりも音が良い事が驚きです。
    約6万円のモデルですがサウンド面では高価格帯と大きくは変わらないと思います。

    ナット高も低めで弾き易く、フレットサイドの処理も低価格帯としても丁寧な部類です。
    音質も良いとなれば低価格帯ではかなり勧められますね。

    詳細についてはYoutubeにも動画を上げておりますので参考下さい。

    ありがとうございました♪



    This is a Squier Classic Vibe ’60 Stratocaster setup as featured on Youtube.

    It is brand new, made in 2025.
    There were no problems with this one, especially in the initial state, and the initial state of adjustment was better than other makers.
    There is enough truss rod left over and it is in good condition.

    After adjustment, it was easy to play and the sound was amazingly good.
    It is a 60,000 yen model, but in terms of sound, I think it is not much different from higher-priced models.

    The nut height is low, making it easy to play, and the fret side treatment is also very well done, even in the low price range.
    The sound quality is also good, which is highly recommended in the low price range.

    For more details, please refer to the video on Youtube.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250211_083319999
  • Ibanez AZ2204 セットアップ

  • 2025/04/27
  • Category:
  • アイバニーズ製AZ2204のセットアップです。

    大きな順反りで弦高が高い状態です。弾き難い状態でも楽器屋では普通に売っているので調整してもらってから試奏を申し込んだ方が良いです。

    調整してみると弾き易く音が良いモデルです。
    シングルが特に音が良いですね。

    Ibanez製は低価格帯でも弾き易く音質が良いモデルが多いですが2020年代からインドネシア製に品質が結構変わってきているので注意が必要です。
    新品でもこの個体の様に初期状態で調整がいい加減だったり音が詰まる様な状態の物も出てきているので購入時はチェックの上で購入しましょう。

    ありがとうございました♪


    This is an Ibanez AZ2204 setup.

    It has a large forward bow and high string height. Even though it is hard to play, it is usually sold at music stores, so it is better to have it adjusted before applying for a trial.

    After adjustment, the model is easy to play and has a good sound.
    The singles sound especially good.

    Ibanez has many models in the low price range that are easy to play and have good sound quality, but be aware that the quality has changed quite a bit since the 2020’s to Indonesian made.
    Even new models, like this one, are sometimes in a poor state of initial adjustment or have a stuck sound, so check before you buy.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250301_113724695
  • ATELIER Z Beta-4 CUSTOM セットアップ

  • 2025/04/24
  • Category:
  • アトリエZ製ベータ4のセットアップです。

    ボディをレリックされたラッカーにリフィニッシュされています。
    ネック塗装はポリのままの状態です。

    音の形があり柔らかさのバランスが非常に良いベースです。

    意外とオールラッカーだから音が良くなる訳ではなく、ネックとボディでポリとラッカーを分けるのも音的に有りかもしれません。
    ポリの音の明白さとラッカーの柔らかさが音に良いブレンドされた感があります。

    ネックポケットザグリが妙に深く、調整でシム4枚必要な状態でした。
    全体的にも弾き易くなり音質も良いのでかなり良い個体です。

    ありがとうございました♪


    This is a Beta 4 setup made by Atelier Z.

    The body has been refinished in a reliced lacquer.
    The neck paint is still poly.

    This bass has a very good balance of sound shape and softness.

    Surprisingly, the sound is not better because it is all lacquer, and it may be sonically possible to separate poly and lacquer on the neck and body.
    The sound is a good blend of the plainness of the poly sound and the softness of the lacquer.

    The neck pocket counterbore was oddly deep and required 4 shims for adjustment.
    Overall, this is a pretty good unit as it is easy to play and has good sound quality.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250209_094703839
  • WarWick Streamer Standard セットアップ

  • 2025/04/22
  • Category:
  • ワーウィック製ストリーマーのセットアップです。

    大きく順反りし弦高が非常に高い状態です。まともに弾ける状態ではありません。

    またネックポケットも深く、シムを合計2枚入れて丁度良くなりました。

    新品でも低価格帯は昔と比べ精度が落ちている様に思います。

    音は良いのですが初期状態では恐らく弾き難いと思うので正しくセットアップする事が重要そうですね。

    ありがとうございました。


    This is a Warwick streamer setup.

    The strings are very high with a large forward bow. It is not in a state where it can be played properly.

    Also, the neck pocket is too deep, so I put 2 shims in total to get it just right.

    I think the accuracy of the low-priced new models is lower than in the past.

    The sound is good, but I think it is important to set it up correctly because it is probably difficult to play in its initial state.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250128_113615165.MP
  • Gibson レスポール トグルスイッチ交換&セットアップ

  • 2025/04/21
  • Category:
  • ギブソン製レスポールのトグルスイッチ交換・セットアップです。

    トグル切り替えで音が出なくなる時があるとの事です。

    電装系パーツは消耗品ですので、特にギターでは多用するセレクターは壊れ易いです。
    ジャックは定番に一番壊れるパーツですが、ギターの多くはジャック→セレクターの順で大体は壊れます。
    ストラト等はボリューム操作を多用するとボリュームポットが次に壊れ易くなります。

    トグルスイッチを交換しセットアップする事で問題無い状態に復元しました。

    ありがとうございました♪


    This is a toggle switch replacement and setup for a Gibson Les Paul.

    The guitar sometimes loses sound when toggling the toggle switch.

    Electrical parts are consumables, so the selector, which is used a lot on guitars, is especially prone to breakage.
    The jack is the most common part to break, but most guitars break in this order: jack, selector, and so on.
    The volume pot on a strat or other guitar is the next most likely to break due to heavy use of the volume control.

    By replacing the toggle switch and setting up the guitar, we have restored it to a problem-free state.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250221_094334292
  • Sire V5R セットアップ

  • 2025/04/20
  • Category:
  • サイアー製V5Rのセットアップです。

    新品購入との事ですが調整してみると最初からトラスロッドに余裕が全然無い状態です。
    最近はこうした状態でも詳細を表記せず販売する所も非常に多くなっているので、新品でトラスロッドの余り量を表示しない楽器屋は基本的に信用してはダメです。
    殆どの楽器屋はトラスロッド余り量の重要性を知りません。

    調整でトラスロッドが限界状態となりました。

    低価格帯の中で今の所は最高に良い製品を出しているサイアー、弾き易く音も良いのでお勧めブランドです。
    それだけに状態さえ良い物が買えれば、トラスロッドに充分に余裕があれば長い期間に品質が良いベースを使用し続ける事ができます。

    ありがとうございました♪


    This is a Sire V5R setup.

    The truss rod has no room at all from the beginning when we adjusted it.
    Recently, there are many places that do not indicate the details of the truss rod, so basically, you should not trust a music shop that does not indicate the amount of truss rod left in a new instrument.
    Most music shops do not know the importance of the truss rod excess.

    The truss rod is now at its limit after adjustment.

    Sire has the best product so far in the low price range, and I recommend this brand because it is easy to play and sounds good.
    If you can buy one in good condition, you can continue to use a good quality bass for a long period of time as long as you have enough room in the truss rod.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250129_084712208
  • YAMAKI Y50D セットアップ&ナット溝切り調整

  • 2025/04/18
  • Category:
  • ヤマキ製Y50Dのナット溝切り調整・セットアップです。

    ナットがかなり高い状態でまともに弾くには難しい状態です。
    国産ギターとはいえアコギのナットは昔から非常に高めの事が多いです。
    基本は直さないと弾き難いモデルが今現在でも多くのメーカー品で多く存在します。

    古い年代だが状態が良く、ナット高が非常に高いのに全体の弦高はかなり低めです。
    ナット高を直すとむしろ弦高が低過ぎる為、ブリッジ下に紙3枚を挟んで弦高を上げています。
    恐らくサドルが交換されて弦高を下げている?と思われますが間違った仕上げにされています。
    気になる様ならサドルを作り直して正しい状態にした方がサウンド面でも良くなる事でしょう。

    全体のフレット減りも凄く、古い年代製なのでしょうがないですが直して使うには状態が良いので救いがあります。
    古いアコギはトラスロッドも限界で順反り・ハイ起き・トップ浮きで直して使う見込みが無い事が多いです。

    昔から弦を緩めて保管した方が良いと言えるまともなリペアマンが居たら良かったのですが、そうした知識が無い人達が昔から大半なので正しい事を世間に発信できていない事が原因で昔の名機達は状態が悪く使い物にならなくされ殆どが残らずに捨てられてしまった未来となり残念です。

    ありがとうございました♪


    This is a nut grooving adjustment and setup for a Yamaki Y50D.

    The nut is very high and difficult to play properly.
    Nuts on Japanese acoustic guitars have always been very high.
    There are many models made by many manufacturers that are difficult to play without a basic fix.

    Older guitars, but in good condition, have a very high nut height, but the overall string height is quite low.
    If the nut height is fixed, the string height is rather too low, so three pieces of paper are inserted under the bridge to raise the string height.
    Perhaps the saddle has been replaced to lower the string height? If so, the saddle has been replaced to lower the string height, but the finish is wrong.
    If you are concerned about it, it would be better to rebuild the saddle and make it right.

    The overall fret depth is very low, which is not surprising for a guitar of this age, but it is in good condition and could use some work.
    Older acoustic guitars often have truss rods that are at their limits and have no hope of being used for repair due to forward bowing, high rise, and top float.

    It would have been better if there had been a decent repairman who could have said that it is better to keep the strings loose in the past, but since most people have lacked such knowledge for a long time, they have not been able to communicate the right thing to the world.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250112_123658338.MP
  • SQUIER Affinity Series Stratocaster Maple Olympic White スクワイヤー ストラトキャスター PU交換&セットアップ GOTOH ツインレイル

  • 2025/04/16
  • Category:
  • スクワイヤー製ストラトキャスターのPU交換・セットアップです。

    PUはリアをGOTOH製ツインレイルに交換です。

    こちらのPUはかなり昔に自分のギターにも付けていた事があり、シングルPUをそのまま出力を上げた様なサウンドでストラトキャスターらしさを大きく変える事が無くリアを少し出力アップさせたい際に便利なPUです。

    特に多い事としてストラトのリアは「パワーが大きいPUに交換してしまう」人が多いので、リアは良くなったけどフロントとセンターとのバランスが悪いストラトになりがちです。
    これを避ける為に今より少しだけパワーがあるPUに交換する事がコツなのですが、その丁度良いPUが少ないです。
    低価格ながらツインレイルは非常に良いパワー感なのでリアPU交換に最適なモデルです。

    ありがとうございました♪


    This is a PU replacement and setup for a Squier Stratocaster.

    The rear PU was replaced with a GOTOH twin rail.

    This PU is useful when you want to increase the output of the rear without changing the Stratocaster’s sound.

    This is especially common when people replace the rear of the Strat with a more powerful PU, which tends to result in a Strat with a better rear, but an unbalanced front and center.
    To avoid this, the trick is to replace the PU with one that has a little more power than the current one, but there are few PUs that are just right for this purpose.
    The Twin Rails have a very good power feel at a low price, so this is a great model for replacing the rear PU.

    Thank you very much… ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20250111_115719373
  • Sadowsky METROLINE STANDARD J/J 配線直し&セットアップ

  • 2025/04/14
  • Category:
  • サドウスキー製メトロラインスタンダードの配線直し・セットアップです。

    電装がガリでスイッチ以外は交換しました。

    音のレンジが広くモダン系ベースとして優秀メーカーらしい万能さがあります。

    古い年代製だがトラスロッドの余り量も多く状態が良い個体です。

    サドウスキーのベースは現代でも定番のベースとなっておりますが弾き易く音もタイトで綺麗に鳴ってくれるのでどのジャンルでも扱い易いサウンドと思います。

    ありがとうございました♪


    This is a rewiring and setup of a Sadowski Metroline Standard.

    The electrics were replaced except for the switches.

    It has a wide range of sound and has the versatility of an excellent modern bass maker.

    Although it was made in the olden days, it is in good condition with plenty of truss rod left.

    Sadowsky basses are still the standard today, but this one is easy to play and the sound is tight and clean, making it easy to play in any genre.

    Thank you very much.


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




BLOG CATEGORY

ARCHIVE