タグ別アーカイブ: セットアップ

    PXL_20260112_085349283
  • Futra LIBERTAS ハイパスキャパシター増設&セットアップ

  • 2026/03/09
  • Category:
  • フュートラ製リベルタスのハイパスフィルタ増設・セットアップです。

    お客様持ち込みのハイパスキャパシターを増設し、ボリュームの変化具合が変わりました。

    冬場の乾燥の影響か順反りで弦高が高い状態、指板痩せでフレットが飛び出ている状態です。

    こうした状態も湿気を与え続けていたら戻る可能性はありますが、弾いて気になる様であれば削って対処するしかありません。

    ありがとうございました♪


    Installation and setup of a high-pass filter for the Fyutora Libertas.

    We added a high-pass capacitor provided by the customer, which altered the volume response.

    Due to winter dryness, the neck has warped forward, causing high string action, and the fingerboard has shrunk, making the frets protrude.

    While these issues might resolve with sustained humidity, if they become bothersome while playing, the only solution is to shave them down.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20260123_084725030
  • Gibson レスポール セットアップ

  • 2026/03/05
  • Category:
  • ギブソン製レスポールのセットアップです。

    順反りで弦高が高い状態です。
    反りを調整し弾き易い状態に仕上げる事ができました。

    PUがベアナックル製に変わっててフロントがスッキリ傾向、リアはミュールで硬くないサウンドです。

    Gibson系は音が太くブーミー傾向の為、スッキリ傾向のPUに交換するとバランス良く使えると思います。

    ありがとうございました♪


    This is a setup for a Gibson Les Paul.

    It had a reverse bow and high string action.
    We adjusted the bow and finished it in a state that’s easy to play.

    The pickups have been changed to Bare Knuckle ones. The front pickup has a cleaner sound, while the rear pickup has a mellow, not overly hard sound.

    Since Gibson guitars tend to have a thick, boomy sound, swapping to cleaner-sounding pickups should provide a well-balanced tone.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20260107_114529608
  • Gibson レスポールカスタム 配線直し&セットアップ

  • 2026/03/04
  • Category:
  • ギブソン製レスポールカスタムの配線直し・セットアップです。

    アース線が切れてノイズが大きい状態です。

    アース線を繋げ直す事で直しました。

    ポットが緩んだまま使用していると、ポットが動き内部の配線を引っ張って断線を起こしたりしますので要注意です。
    また元からハンダ付けが下手な場合も多いので、初期状態は壊れ易いと思っていた方が良いかもしれません。

    大きく順反りして弾き難い状態を直し、弾き易い状態に仕上げる事ができました。

    ありがとうございました♪


    Wiring repair and setup for a Gibson Les Paul Custom.

    The ground wire was broken, causing significant noise.

    The issue was resolved by reconnecting the ground wire.

    Be cautious: if a pot is used while loose, it can move and pull on the internal wiring, causing breaks.
    Also, since the original soldering is often poorly done, it’s wise to assume the initial state is prone to failure.

    We corrected the significant upward bow that made it difficult to play and finished it in a state that is easy to play.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20260110_084848072
  • ヒストリー レスポール セットアップ

  • 2026/03/03
  • Category:
  • ヒストリー製レスポールのセットアップです。

    順反りし弾き難い状態です。

    お客様の要望で弦高を低めに調整しました。

    音が良いモデルです。

    ヒストリー製もそうですがクールZ等も中古ではお手頃価格で販売されているのでお勧めです。
    実質フジゲン製なので、値段を考えたら中古で最もコストパフォーマンスが高いかもしれません。

    ありがとうございました♪


    This is a setup for a History-made Les Paul.

    It had a reverse bow and was difficult to play.

    At the customer’s request, we adjusted the string height to be lower.

    It’s a model with great tone.

    History-made guitars like this, as well as models like the Cool Z, are sold at affordable prices used, so I recommend them.
    Since they’re essentially Fujigen-made, considering the price, they might offer the best cost performance among used guitars.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20260106_084939685
  • FenderMexico プレシジョンベース 配線直し&セットアップ&ペグ修正

  • 2026/03/01
  • Category:
  • フェンダーメキシコ製プレシジョンベースの配線直し・セットアップです。

    内部配線が雑、断線で音が出ない状態です。

    ペグがサイズが違う物に交換されている様子です。
    4弦ブッシュが簡単に抜けるので、ここのみ接着で修正しました。

    音が良いモデルです。

    ボディは日本製の物に交換されているとの事で、ちゃんとした所でレリック加工されている様子です。

    レリック加工は非常にセンスが重要な加工で、素人がするといわゆる「レリックしました感」が出てきます。

    ありがとうございました♪


    Wiring repair and setup for a Fender Mexico-made Precision Bass.

    Internal wiring was sloppy, with breaks causing no sound output.

    The tuning pegs appear to have been replaced with different sized ones.
    The 4th string bushing came out easily, so only this area was fixed with adhesive.

    It’s a model with great tone.

    The body has been replaced with a Japanese-made one, and it appears to have been professionally reliced.

    Relic processing is a task where taste is crucial; when done by amateurs, it often ends up looking obviously “reliced.”

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20251230_073305024
  • Navigator Les Paul Custom レスポールカスタム 配線直し&セットアップ SEYMOUR DUNCAN SH-55n Seth Lover Gibson P.A.F

  • 2026/02/26
  • Category:
  • ナビゲーター製レスポールカスタムの配線直し・セットアップです。

    お客様持ち込みのフロントPUにセイモアダンカン製SH-55、リアにGibsonの80年代PAFを付けた状態です。

    配線がベルデンのヴィンテージ配線、コンデンサにバンブルビーの組み合わせです。

    フロントは音が甘い傾向だが音抜けが良く、リアはバーストバッカー1より柔らかくやや出力がある感じです。

    古い年代製のPUは磁力落ちの影響で音が柔らかくなるので、現行品にも同じ物があると比べたらハッキリと音の違いが分かるかと思います。

    ありがとうございました♪


    Wiring rework and setup for a Navigator-made Les Paul Custom.

    The customer-supplied front pickup is a Seymour Duncan SH-55, and the rear is a Gibson 80s PAF.

    Wiring uses Belden vintage wire paired with Bumblebee capacitors.

    The front pickup has a sweet tone but excellent projection, while the rear feels softer than a Burstbucker 1 with slightly more output.

    Older pickups tend to have softer tones due to magnetic field decay. Comparing them to current models with the same model number should clearly reveal the tonal difference.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20251224_094809450
  • vanzandt ストラトキャスター 配線直し&セットアップ ブレンダー回路

  • 2026/02/25
  • Category:
  • ヴァンザンド製ストラトキャスターの配線直し・セットアップです。

    またお客様の要望でリアのトーンを250kΩから500kΩにしてみたいとの要望で交換しました。
    スイッチポットを使い、フロントPUを混ぜるブレンダー回路になりました。

    トーンでも250KΩから500kΩになるとコモる範囲が減り、微調整の幅が広がる印象です。
    ボリュームポットのKΩを変えて音を変える方法は定番ですが、トーンでもサウンド変化が起こります。

    ブレンダー回路はセンター+リア時のポジションでONにすると、フロント+リアの他にPU3つを鳴らす事も可能になり新しいストラトに産まれ変わります。

    ブレンダー回路も近年の定番改造になってますので、まだ知らない人は試した方が良いでしょう。

    ありがとうございました♪


    Wiring rework and setup for a Vanzand Stratocaster.

    Also, per the customer’s request, we replaced the rear tone pot from 250kΩ to 500kΩ.
    Using a switch pot, it now functions as a blender circuit mixing the front pickup.

    Changing the tone pot from 250kΩ to 500kΩ seems to reduce the range of muddiness and expand the scope for fine-tuning.
    Changing the KΩ rating of the volume pot to alter the sound is a classic method, but changing the tone pot also produces sound variations.

    With the blender circuit, when switched ON in the Center + Rear position, it allows all three pickups to sound simultaneously, in addition to Front + Rear, effectively reborn as a new Strat.

    The blender circuit has become a standard modification in recent years, so if you haven’t tried it yet, it’s worth giving it a shot.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20251224_123652674
  • EDWARDS E-FR-145GT セットアップ&ジャック交換

  • 2026/02/23
  • Category:
  • エドワーズ製フォレストのセットアップ・ジャック交換です。

    大きく順反りしてかなり弦高が高い状態です。

    その他にジャック消耗で音が途切れる状態ですので新品に交換しました。

    正しく調整する事で弾き易い状態に仕上げる事ができました。

    ありがとうございました♪


    Edwards Forest setup and jack replacement.

    The neck was significantly bowed backward, resulting in excessively high string action.

    Additionally, the worn jacks were causing intermittent sound dropouts, so they were replaced with new ones.

    Proper adjustment has restored playability to an optimal state.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20251212_093634886
  • Fullertone ストラトキャスター ピックガード交換&配線直し&詳しい状態診断&ナット溝切り調整&セットアップ K&T

  • 2026/02/22
  • Category:
  • PXL_20251210_101552212

    PXL_20251209_085113826.MP

    フラートーン製ストラトキャスターのピックガード交換・配線直し・ナット溝切り調整・セットアップです。
    加えて詳しい状態診断です。

    K&T製のモデル年代は不明ですが中古品PUに交換、ヴィンテージベルデン配線にて組み込みです。

    ナット高が1~3弦だけ高めな状態を削って直しました。

    トラスロッドの余り量も多く良好個体で、何年製かは不明ですが良好個体です。
    調整した状態から1周程度はトラスロッドの余りがあります。

    モッサリ感ある古い年代製のサウンドに仕上がりました。

    ありがとうございました♪


    Flatone Stratocaster pickguard replacement, rewiring, nut slot adjustment, and setup.
    Includes detailed condition assessment.

    Model year unknown K&T model, fitted with used pickups and vintage Belden wiring.

    The nut height was adjusted by shaving down the excess height on strings 1 through 3.

    The truss rod has ample adjustment range remaining, indicating a well-maintained instrument. While the exact year of manufacture is unknown, it is in excellent condition.
    After the adjustments, there is still about one full turn of truss rod adjustment left.

    The result is a sound characteristic of an older, more vintage-feeling guitar.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




    PXL_20251120_132246619
  • ThornTree ストラトキャスター ピックガード交換&配線直し&セットアップ LINDY FRALIN REAL 54 Set White

  • 2026/02/19
  • Category:
  • PXL_20251120_120620303

    ソーンツリー製ストラトキャスターのピックガード交換・配線直し・セットアップです。

    ピックガードを交換しポット交換2箇所・コンデンサ交換、PUをリンディフレーリンのリアル54に交換です。

    こちらはスイッチでPUを制御する仕様となるので、フロントとリアのハーフトーンや3つ全てONのサウンドも使用できる状態になります。

    音の粒が綺麗に鳴り、コード感も良いです。
    どのポジションも音が良く、スイッチ切り替えなので瞬時には難しいですが全体的に良いサウンドです。

    ありがとうございました♪


    Pickguard replacement, rewiring, and setup for a Thorn Tree Stratocaster.

    The pickguard was replaced, two potentiometers and a capacitor were swapped out, and the pickups were upgraded to Lindy Fralin Real 54s.

    This setup uses a switch to control the pickups, enabling half-tone sounds from the front and rear pickups, as well as a full-on sound from all three pickups.

    The tone is clean and crisp, with excellent chord definition.
    Every fret position sounds great. While instant switching between sounds might be challenging, the overall sound quality is superb.

    Thank you very much! ♪


    〒114-0014 東京都北区田端1-21-3 エーデルワイス101

    ギターリペア工房 Draw a New Sound

    東京都 山手線 田端から徒歩2分 どこよりも早いリペア早期仕上げ対応可能のリーズナブル料金&丁寧な作業のギターリペアショップです♪

    ●ホームページ Draw a New Sound

    ●YouTubeではブログでは語られない裏話からギターの作り方まで掲載中! 
    マイチャンネル YouTubeチャンネル

    ●ツイッター DNS_Guitar




BLOG CATEGORY

ARCHIVE